Engraving Accessories

Must have accessories for engravers.
cal.jpg Calipers
$44.00
Calipers - All engravers need this item!! This handy 6" caliper is used to measure your depth of engraving, material thickness and letter height in a precise manner - NO MORE GUESSWORK! Features: Stainless Steel, covered rack, 4 way measurement: Inside, Outside, Inches, mm scale
Depth.jpg Depth Guage
$121.00
Depth Gauge - Micrometer depth gauge enables engravers to accurately check the depth of engraving in increments of .001
Paint.jpg Paint Filling Tool
$99.00
Paint Filling Tool: Convenient - Quick - Clean - Easy to Use. Special Bellco Tool for use in engraving & paint filling. No outside source/compressed air needed. Comes with 4 different easy to change tip sizes. A Must for Engravers who color fill.
sheartable.jpg Table Shear for Plastic
Cuts Plastic up to .0625 Ideal for cutting badges, nameplates, strips, panels, film backed polymer. Not designed for metal.
· Table Shear for Plastic
$470.00
· Top Blade for Plastic
$72.00
· Bottom Blade
$61.00
· Replacement Scale
$42.00
· Replacement Guard
$22.00
sheartable.jpg Table Shear for Metal
Cuts brass up to .025" thick & aluminum up to .040". Ideal for cutting trophy brass, aluminum & A.D.A. aluminum backed photopolymer. Cuts 12" x any length - clean cut - safety guard in cluded.
· Table Shear for Metal
$470.00
· Top Blade for Metal
$72.00
· Bottom Blade
$61.00
· Replacement Scale
$42.00
· Replacement Guard
$22.00
ENGRVLAB.jpg EngraveLab Software 9.0
$999.00
Top of the Software for Your Roland Engraver v12
Vacuum_Chip_Removal.jpg Vacuum Chip Removal System
$720.00
Vacuum for plastic engraving.
Multi-Mat.jpg Multi_Mat 8x12
$150.00
The new revolutionary ENGRAVING TABLE HOLD DOWN MAT
Multi-Mat.jpg Multi_Mat 9x12
$150.00
The new revolutionary ENGRAVING TABLE HOLD DOWN MAT
Multi-Mat.jpg Multi_Mat 12x16
$180.00
The new revolutionary ENGRAVING TABLE HOLD DOWN MAT
Multi-Mat.jpg Multi_Mat 16x24
$353.00
The new revolutionary ENGRAVING TABLE HOLD DOWN MAT
Belts.jpg KB-200 Motor Belts
$33.00
850-191
Set of 2 Motor Belts for Beveler
Belts.jpg PM-3, PM-5, PM-5CA Motor Belts
$33.00
850-190
Set of 2 Motor Belts for Manual Engravers
Belts.jpg Dahlgren Wizzard Motor Belts
$44.00
850-192
Set of 2 Motor Belts for Wizzard Engraver
Dig_Calipers.jpg Digital Calipers 6"
$55.00
This handy 6" caliper is used to measure your depth of engraving, material thickness and letter height in a precise manner giving you a digital display of measurements-NO MORE GUESSWORK!
Dia_Wheel.jpg Diamond Wheel-for Bellco Kantograph
$303.00
G-90 4" Dia
Resin Bonded Diamond Wheel for optimum grinding efficiency-Long Lasting-for Bellco Kantograph G-90 4" dia.
Dia_Wheel.jpg Diamond Wheel-for New Hermes
$303.00
840-106
Resin Bonded Diamond Wheel for optimum grinding efficiency-Long Lasting-For New Hermes CG5 2-1/4" dia.
ZV-23C_VISE.jpg Vise for EGX-300/350
$350.00
ZV-23C
Vise for EGX-350, EGX-300 & PNC-2300A
mv-1_EGX20_vise.jpg Vise for EGX-20
$514.99
MV-1
NEW! Self Centering Vise for EGX-20 This vise and fixture kit comes complete with the following: Vise, Pin Jig with 10 pins to secure uniquely shaped items, Pen Fixture, Ruler Bar Fixture, and two Medallion/Seal Fixtures. One Medallion/Seal fixture is metal for standard medallions, the second is plastic to secure easily scratched medallions and seals. An Installation Manual and Tool Bag to store the fixtures are also included.
FP-EGX20_L.jpg EGX-20 Fixture Plate
$350.00
FP-EGX20
The FP-EGX20 Fixture Plate holds down objects by placement pins and locked in place with a v-bracket. The fixture plate comes with 3 brackets and 6 brass fixture pins. The plate attaches to the EGX-20 by four mounting screws direct to the EGX-20 Table.
mv-2_EGX300_600_Vise.jpg Vise for EGX-300/350/360/400/600
$719.99
MV-2
NEW VISE FOR EGX-300/350/360/400/600 This vise and fixture kit comes complete with the following: Vise, Pin Jig with 10 pins to secure uniquely shaped items, Pen Fixture, Ruler Bar Fixture, and two Medallion/Seal Fixtures. One Medallion/Seal fixture is metal for standard medallions, the second is plastic to secure easily scratched medallions and seals. An Installation Manual and Tool Bag to store the fixtures are also included.
Aluminum Letter Blackener
$12.00
408-010
4 oz. Bottle - Oxidizing Agent for Darkening Letters Engraved into Anodized Aluminum
Quantity
Brass Letter Blackener
$18.00
308-010
3 oz. Bottle-Oxidizing Agent for Darkening Letters Engraved into Engraver's Brass.
Quantity